SOLIDWORKS 2025 Hardware Guide
SOLIDWORKS Hardware Recommendations
Below is a summary of the key components of a PC that affect SOLIDWORKS performance. The best hardware for your environment is heavily dependent on your budget and workflow; however, the information in this document is designed to help end users and their IT support make knowledgeable decisions when selecting hardware. There are four main components that can significantly impact SOLIDWORKS performance. Let’s cover those first.
1 Processor (CPU)
The CPU carries out most calculations within SOLIDWORKS and is the most common limiting factor for hardware performance. In general, the faster the clock speed (GHz), the better. While SOLIDWORKS IS multi-threaded, some CAD processes remain inherently linear (i.e. opening, rebuild, and certain analysis tasks). It is often beneficial to purchase a 4-core CPU with faster clock speed over options with 6+ cores if the option is available.
For general CAD use, a 4+ core CPU with speed in the 3-4GHz range and 16-32 GB cache will satisfy most users. Users running many other programs at the same time as SOLIDWORKS, or who heavily utilize simulation and photo rendering tools, will benefit from a higher end CPU with additional cores. The most common CPUs are Intel Xeon, Core 7 or Core 9, with Xeon being classified as a server processor that uses ECC RAM for maximum data integrity.
Overclocking CPUs beyond what the manufacturer recommends is not recommended as we have found that the small performance gains for doing so are often overshadowed by the shortened lifespan of the components.
2 Graphics Card
The graphics card is fundamental to CAD productivity. It assists with operations such as rotating and rendering the model during normal use. Using an unsupported video card can result in loss of functions that may impact user interaction with the software and software stability. SOLIDWORKS maintains a directory of hardware configurations that have been tested and certified to provide excellent results. Exclusion from this list does not indicate a lack of support, but rather a lack of testing. When searching for a card, search by the computer vendor first if the card was pre-installed and choose Any System Vendor if the card was installed separately or as an upgrade.
Graphics cards generally fall into one of two primary purposes and are optimized for that use. Workstation OpenGL cards carry names like NVIDIA Quadro and AMD Radeon Pro and are highly recommended for any serious SOLIDWORKS user. NVIDIA GeForce cards and AMD Radeon RX cards are typically gaming cards and are not designed for CAD but may work for very light editing and viewing. The gaming cards are not tested, certified, or supported for SOLIDWORKS applications. If a gaming card must be used, reboot regularly to avoid graphics-related glitches and crashes, twice daily would be ideal.
When evaluating graphics cards, typically a higher series number indicates better performance. Online video card benchmarks exist such as PassMark if you want to compare two specific cards for raw performance. A few words of advice regarding graphics cards:
- Cost increases exponentially in the higher range of cards, but the return on investment diminishes.
- Each new series is generally equal to the next level up from the previous series. (For example, a brand new 1000 card might perform as well as last year’s 2000 card). For similar money, always choose the newer generation card.
- Support for cards 5+ years old can be limited as graphics engines are updated and driver support and availability are dropped.
- MLC CAD Systems has had great success with the mid-range NVIDIA Quadro line of cards. 1000 to 4000-series cards are ideal for performance and value, which equates to a cost of between $200 to $1,000 for the card. Budget cards and high-performance cards are also available when necessary.
Tip: Check that the video card driver is updated at the same time the software is updated. The SOLIDWORKS RX program can be used to automatically check your current graphics cards and driver’s compatibility with the rest of your system.
3 RAM (Random Access Memory)
It is a common misconception that more RAM equals faster performance. A better way to phrase this is: if you run out of RAM, performance will suffer significantly. If you have more RAM than needed, the excess RAM does not contribute to better performance. The goal is to have enough RAM for daily workloads to avoid paging to the hard drive.
SOLIDWORKS currently recommends 16 GB for the average SOLIDWORKS user. This allows for complex models to be opened and still allows plenty of memory for most other programs to run simultaneously. Users with complex analysis or rendering requirements may require 32 GB, and 64 GB requirements are rare.
Note: If you receive a warning regarding low resources, do not assume it is memory. Contact support to properly diagnose the error. Typical sources for this error include desktop heap and an insufficient swap file size.
Tips: Irrespective of which type of memory you use, populate each memory channel equally. Whether you have two or four memory channels/slots, populate all channels/slots with matched memory modules of the same size and speed. For speed, invest in the fastest RAM your processor can support, because it can make a noticeable difference.
4 Storage (Hard Drive)
The minimum requirement for hard drive space by SOLIDWORKS is to have the program installed. It does not account for data storage. There are 3 main considerations when choosing hard drives: Speed, Size, and Type.
- Size: Consider OS, applications and files stored. If very large storage requirements exist, a combination of drive sizes and types might be the best option.
- Speed: Traditional hard drives with a faster spindle speed will read and write faster. This equates to a faster ‘File, Open’ time. Compare transfer speeds and access times to find the fastest drive option.
- Speed: Traditional hard drives with a faster spindle speed will read and write faster. This equates to a faster ‘File, Open’ time. Compare transfer speeds and access times to find the fastest drive option.
** Faster HD speed or SSD will NOT improve open performance if files are stored remotely (over network).
We recommend installing Windows and SOLIDWORKS on high-speed solid-state drives. An effective solution that balances performance and cost is to purchase a smaller SSD (~256 GB) for the operating system and installed programs and a traditional 7200 RPM drive for bulk storage.
5 Other Performance Factors
In conclusion of the SOLIDWORKS Hardware Guide 2023, no amount of financial investment in hardware is a substitute for good design practice. Attending SOLIDWORKS classes from certified Value-Added Resellers is a huge benefit for learning all the tools, tips, and tricks that SOLIDWORKS makes available to properly manage resources during the design and analysis process. Many special workflows also exist to streamline or bypass complex or bulky operations, inquire about workflows that will allow large operations to be performed more quickly without upgrading the hardware. There is an upper limit to hardware performance that must be balanced by user performance to maximize productivity.
Proper system maintenance is crucial. Keep the system clean from dust and free of junk software. Restart your computer daily, perform regular system updates and patches, and use updated security anti-virus software that is configured to treat SOLIDWORKS files and processes as safe. Perform regular backups of your engineering data at an absolute minimum, and backup the drives and/or user settings to streamline recovery in the event of a hardware failure. If overall system performance degrades over time, consider re-installing the operating system (Windows 10 and 11 makes this much easier).
Frequently Asked Questions
SOLIDWORKS runs better on systems with a multi-core CPU (3.3GHz+), 32GB+ RAM, and a certified GPU, for most modelling practices. While minimum specs are lower, these recommendations help avoid performance issues.
SOLIDWORKS is primarily CPU-bound, but certain features like RealView and rendering benefit from a certified GPU.
We recommend a minimum of 16GB of RAM, but 32GB or more is ideal for larger assemblies or simulation work.
Use a certified GPU from NVIDIA or AMD for optimal performance. Click Here to See SOLIDWORKS’ official graphics card certification list.
Check our up-to-date guide here: https://www.mlc-cad.com/solidworks-help-center/solidworks-and-sw-pdm-system-requirements/
We break this down in our full buying guide here: https://www.mlc-cad.com/solidworks/solidworks-tech-tips/solidworks-workstation-laptops/
Check our performance tuning article for ways to improve speed without upgrading hardware: https://www.mlc-cad.com/solidworks/unleash-your-solidworks-potential-the-top-laptops-for-optimal-performance-in-2024/
SOLIDWORKS is not natively supported on macOS, but it may run through virtual environments or Boot Camp. However, performance and support are not guaranteed.
SOLIDWORKS Technical Support
You can also contact us about Training or get help from our team by Calling us at 800-364-1652, Emailing us at solidworkssupport@mlc-cad.com, or Clicking here for SOLIDWORKS Technical Support.