Mastering Tolerances in SOLIDWORKS: Center Lines & Dimensions in Technical Drawings (9/13)

Center Lines & Dimensions in Technical Drawings

In the intricate world of engineering, precision is paramount. One slight deviation in measurements can lead to a cascade of issues down the line. Today, let’s delve into the process of detailing a drawing with precise dimensions and the challenges that come with making critical tolerance decisions in SOLIDWORKS.   

Adding Center Lines

One instance where attention to detail comes into play is when you want to add a center line. By clicking across these two points, we create it. It’s worth noting that although this looks like empty space, it’s actually a cylinder in the 3D model. Just clicking a cylinder will put a center line there. However, in this case, we need to click both sides to get it to work correctly. 

Moving Components and Adding Dimensions

Notice that I have the 2.933 measurement from hole to hole. I also want to show this hole to another and continue this process to reflect all necessary measurements.

The Problem of Overdefining

Here’s where things get tricky. Presenting so many dimensions leads to overdefining the spacings. You’ll have to decide which dimensions will be reference only, since you can calculate the others through math.

Decision-Making in Tolerance

These decisions aren’t just numbers; they are often hard and, at times, arbitrary. The spacing in each case is critically important. One dimension must take precedence over the others. Thus, tolerance and spacing decisions on the design side are challenging yet crucial. This careful balancing act ensures the design remains feasible without complicating the machinist’s task.

Conclusion

As we continue crafting our drawings with detailed views and precise dimensions, it’s essential to be mindful of the tolerance decisions we make. These decisions require thought, precision, and sometimes a bit of ingenuity to ensure the final product meets all design criteria without burdening the machinist with excessive complexity. In the end, it’s all about achieving a perfect balance between design intent and manufacturing feasibility.

Catch Up On Our "Mastering Tolerances In SOLIDWORKS" Series

Technical Support

Get help from our team by Calling us at 800-364-1652 x 2. You can also get assistance by clicking the Technical Support button or the Email Our Experts button below. 

About the author

Contact Us to Discuss Your Challenges

Scroll to Top