Mastercam Activation Instructions
Download and Install Components
First, download the latest Codemeter install from Mastercam.com, install this on the server.
Second, download and install Mastercam Activation Wizard on the server and use this to input licensing
information.
Run Activation Wizard to activate license, then follow below instructions on how to configure codemeter
on server and client pc’s.
- Select Online Activation/Deactivation.
- Select Activate a New License.
- Accept the terms on the Terms and Conditions page, and then click Next.
- Enter in your License number and Activation code on the Product Activation Code page.
- Click Next.
- The Activation Wizard then checks your computer to see if it is connected to the Internet.
- The Verify License Information page displays the list of products that will be activated during
this session. If the products are incorrect, please contact your local Mastercam Reseller. - If the products listed are correct, select the checkbox to accept the terms, and click Next.
- The Activation Wizard begins the activation process. Upon successful activation and setting up
codemeter, you may begin using Mastercam
Setting Up The Server Computer
A CodeMeter server must be set up when broadcasting a network software license. Use the following procedures to set up your network.
- From the Windows Start menu, select CodeMeter, CodeMeter Control Center.
- The CodeMeter Control Center dialog box displays.
- In the CodeMeter Control Center dialog box, select WebAdmin.
- Your default browser displays the CodeMeter WebAdmin website.
- From the website menu, select Configuration, Server, Server Access.
- Set Network Server to Enable.
- Select Apply and close the CodeMeter WebAdmin website.
- This will broadcast the software license over the network.
- NOTE: Network Port must be set to 22350. Any system firewalls must have an exception for this port.
- Make note of the IP address of the server. You will need this if the user computer has difficulty contacting the server.
Setting Up The Client Computer
Once the license has been activated and configured on the server, Mastercam users should be able to install and run Mastercam. The following procedure directs a client to the server.
- From the Windows Start menu, select CodeMeter, CodeMeter Control Center.
- The CodeMeter Control Center dialog box displays.
- In the CodeMeter Control Center dialog box, select WebAdmin.
- Your default browser displays the CodeMeter WebAdmin website.
- From the website menu, select Configuration.
- Select Add new server.
- Enter the Server IP address of the PC or server that is hosting the license, then click OK.
- Click Apply and close the CodeMeter WebAdmin website.
- The user PC should now be able to run Mastercam.