How to Resolve a Calibration Offset Error on Markforged X3, X5, and X7 Industrial Composite Printers
Markforged’s Industrial composite printers – the X3, X5, & X7 – run pre-print routines before each print, ensuring proper bed adhesion
Markforged’s Industrial composite printers – the X3, X5, & X7 – run pre-print routines before each print, ensuring proper bed adhesion
The Markforged Industrial Series of 3D Printers has an integrated Z-Axis Calibration Utility that can be executed from the interface.
Z-Axis Calibration Utility – Markforged Industrial Series 3D Printer Read More »
Blacksmith is an exclusive feature of Markforged and the Eiger software that controls it. Using an integrated inspection laser, Blacksmith performs multiple critical functions to maximize the production capabilities of the X7 and FX20 printers.
Printer Calibration can be performed at the machine, accounting for even the slightest alignment or wear issue in the hardware to ensure maximum precision and accuracy over the entire life of the machine. Bed leveling and profiling allow for minor imperfections in the bed surface to be offset for a perfect first layer and a more reliable print.
In-Process Inspection can measure the part as it is printed, checking for problems and even compiling inspection reports of parts as they print, making the production and inspection processes a parallel operation instead of sequential. It even enables inspection of features that are difficult or impossible to inspect after the part is completed such as internal features.
Quality reports are generated from the in-process inspection so parts are ready for service in demanding applications such as aerospace or safety components.
Introduction to Inspection – Markforged Industrial Series 3D Printer – Eiger Read More »
The laser offset should be adjusted on an Industrial Series printer any time you change out the print head. The process includes a test print, followed by an adjustment routine; completing the utility will correctly set the laser height.
Ensure that you have Onyx and either carbon fiber (for X7) or fiberglass (for X5) loaded into your printer before proceeding — Nylon White is too reflective to be used for this purpose, and will lead to an incorrectly calibrated laser.
In the Menu – Utilities – Print Head Alignment – Laser-Guided Offsets, the utility will print a sample part to test and calibrate the laser. Follow the menu prompts and accept the results to complete this utility and prepare your printer for production.
How to Adjust Laser Offset – Markforged Industrial 3D Printer Read More »
To calibrate these encoders, navigate to the Menu and Follow the on-screen prompts to unload the plastic and allow the routine to complete.
Calibrate Motor Encoders – Markforged Industrial Series 3D Printer Read More »
The fiber nozzle on a Markforged Industrial printer must be set to precisely the correct height relative to the plastic nozzle to ensure the continuous fiber reinforcement lines up with the part during the print. A utility to adjust the height and confirm the relative position of the nozzles is included and walks the user through the height adjustment routine.
Nozzles will need to be adjusted for height periodically due to wear and any time a nozzle is replaced or the machine is moved.
Fiber Nozzle Height Adjustment – Markforged Industrial Series 3D Printer Read More »
How to load plastic (polymer) material into a Markforged Industrial printer and get accurate material-remaining estimates during operation.
How to Load Plastic in a Markforged Industrial 3D Printer Read More »
The Markforged X7 Industrial printer includes an automated laser-assisted bed leveling routine. We’ll show you how it’s done.
How to Laser Level the Print Bed on Markforged Industrial Read More »
The proper belt tension on the Markforged Industrial Printer is critical for long equipment life and accurate prints.
How to Adjust Belt Tension on the Markforged Industrial Printer Read More »
Turbo Print is a setting that enables the Markforged X7 to print at twice its previous top speed without sacrificing surface finish.
How to Upgrade Markforged X7 Gen1 for Turbo Print Read More »