|
Mastercam Lathe provides
powerful Lathe capabilities including the ability to Click
and drag a machining start point to anywhere on your model.
Intelligent roughing of inside
and outside diameters, including roughing to a boundary for
castings. Finish contouring (profiling). Set a
CSS feed rate for the desired finish quality.
Groove at any angle with
multiple depth cuts and pecking. Easily define groove
depth, width, wall angles, corner radius and chamfer.
Complete threading with multiple
starts, diameter calculation and thread tables.
Boring, drilling and point-to-point machining.
Automatic gouge checking watches the front and back of the
insert. Chuck, part, steady rest, and tailstock
detection.
Open and directly machine a
solid model. Cut across the centerline of the part
using a stock boundary. New tool angle control
streamlines advanced Multi Task machine programming,
allowing on-the-fly changes to the B-axis tooling arm angle.
|
In addition Lathe provides powerful
C-axis (Mill/Turn) Programming. Just a few of Mill/Turn
programming features include...
 Full
C-axis milling when combined with any Mastercam X2 Mill package
Face
and Cross drill including the ability to sort points in a clockwise
or counterclockwise sweep (rotary) direction
Machine
C-axis contours with three-dimensional or flat geometry
Mastercam Lathe also includes
Comprehensive insert libraries including updated Kenametal, Iscar,
Valenite, and Sandvik, as well as a new Sandvik Swiss Tool Library.
Lathe also includes dependable NC
verification. Quickly check toolpaths as they are created with
a cross-section of the part in progress. View or save a 3D
model of your part at any machining stage.
And finally, view or verify your part
being cut with Mastercam's backplot or solid toolpath verification.
|
Information
Video
|
No
Videos Available |
Downloads
|
No
Downloads Available |
Links
|
No
Links Available |
|
